M5264 Dual channel high-precision microinjection pump

In animal experiments, it is often necessary to perform microinjection on animals. An automatic microinjection pump is used, which is convenient to use. The syringe of the injector is installed on the injection pump and connected to the gripper through a conduit. The precise movement of the injector piston is controlled by a microcomputer to drive the unit, achieving injection or recovery of liquids in experimental animals and leaving more operating space for the experiment.
M5264 dual channel independent control microinjection pump, high-definition touch screen operation, Ditronstep micro step control system, used for precise control and delivery of trace liquid drugs or solutions. One to two structure, dual channel independent control; high-precision; Low pulsation; Suitable for a variety of complex application combinations; Full touch screen; A standard injector suitable for μ L specifications. The vertical installation structure can be conveniently used in conjunction with biological instruments such as micro manipulators and stereotaxic brain locators, and is widely used in various fields of biological experiments.

1. Operation mode: independent, reciprocating, synchronous, synchronous merging
2. Working mode: infusion, extraction, infusion/extraction, extraction/infusion, continuous, multiple infusion
3. Touch display: 5-inch high-definition touch screen, simple, clear, easy to understand, and controllable
4. Language types: Chinese and English, 2 languages to choose from
5. Online speed regulation: adjust the current flow rate without stopping the machine during operation
6. Calibration function: Each channel injector can be independently calibrated and calibration parameters can be stored independently
7. Syringe selection: Built in from major domestic and foreign manufacturers, with a choice of main models of syringes and support for customization
8. Parameter settings: Each channel can independently set liquid volume, flow rate, infusion time, extraction time, interval time, and store them independently
9. Power on operation: Store the current dynamic operating parameters when powered off, and resume operation after powering on again
10. Reminder function: Real time display of available Min/Max flow rates for each channel; Dynamically display the operating parameters of each channel
11. Reminder function: When each channel reaches its set target liquid volume, an audible alarm will sound to remind each channel
12. Thrust setting: Each channel sets the appropriate thrust according to its own injector specifications
13. External control function: External level or pulse signal to achieve independent start stop control of each channel
14. Communication control: RS485/USB optional, touch settings for address and baud rate
15. Status output: Each channel independently outputs start stop and direction status

1. Number of channels: Dual channels
2. Operation mode: independent, reciprocating, synchronous, synchronous merging
3. Working mode: infusion, extraction, infusion/extraction, extraction/infusion, continuous, multiple infusion
4. Maximum travel: 150mm
5. Accuracy:<1%
6. Repetitive accuracy: Error ≤ ± 0.05%
7. Sample injector specifications: 0.5 μ L to 60mL
8. Linear thrust: ≥ 160N
9. Linear speed range: 0.08 μ m/min to 160mm/min
10. Step resolution: 0.0625 μ m/μ step
11. Applicable power supply: AC 100V~240V 50/60Hz 30W
12. Working environment: Temperature: 0-40 ℃ Humidity: Humidity 20% -80% RH No condensation
13. Storage environment: Temperature: -10~60 ℃ Humidity: 20% -80% RH No condensation
14. Protection level: IP31
15. Product size (mm): 256 * 218 * 152 (mm)