简体中文
English
The rat and mouse nebulization drug delivery device uses compressed air generated by compression to spray out from the nozzle, creating negative pressure between the nozzle and the suction pipe, and sucking up the drug solution upwards. The liquid sucked up impacts the partition above, turning into an extremely fine mist that sprays out to the outside. Provide animal respiratory, oral, pulmonary and other absorption medications.
Technical Parameter
1. Gas atomization method: compression type
2. Gas flow rate: 0-10L/min
3. Liquid capacity: 0~30ml
5. Particle size: 75% are below 0.2~5um
6. Upper limit atmospheric pressure: 180-300Kpa
7. Noise: below 60db
8. Timing: 0~9999 minutes
9. Speed regulation method: infinite variable speed
10. Induction box size: 300x240x200mm
11. Sealed box material: PC material
12. Filter material: Activated carbon
13. Weight: 2.5KG
14. Power supply: 220V 50HZ
Usage
1. Insert the hose into the bottom air inlet of the atomizer cup, then insert the side opening of the atomizer cup into the air inlet of the sealed box, and insert the other end of the hose into the air outlet of the atomizer. Pour the medicine into the atomizer cup, which has a scale on the side.
2. After the instrument is connected, turn on the power and set the administration time to 0-30 minutes. The concentration can be controlled through high, medium, and low levels. Then click on start, and when the time is up, the medication will end.
